3 Axis precision adjustable wire-cut vise fixture

Description:

3 Axis precision adjustable wire-cut vise
1.the vise with good stability, rigid without deformation.
2.strongly clamping.

3 Axis  precision adjustable wire-cutvise
1.the vise with good stability, rigid withoutdeformation.
2.strongly clamping.

Feature:

1. Precision wire cutting EDM vise is used in conjunction withhigh precision WEDM Property of stainless steel, treated by csting,vacuum heating and deep cryogenic forming and finished grindingmolding, finally the VISE with good stability, rigid withoutdeformation.

2. The alignment can be done on horizontal and parallel bothsides along X, Y, Z three axis to reduce workpiece positioningcorrection time, result in the increasing of machine workingefficiency.

3. Jaw angle is using a 45°c cross-eye design, with stronglyclamping, not upturned, high water resistance against highflushing  pressure

4. Additional option is providing to work with precision visesto clamp round workpiece to increase the vise using rate.

5. Recommended maximum load capacity of 10kg.

Specification parameters:Parallelism : 100 mm/3u

Squareness:100 mm/5u

Material: sus420 or sus440(stainless steel)

Heat Treatment Hardness: HRC50-55°

Clamping range: 0-100mm   0-150mm

 

3 Axis precision adjustable wire-cut vise fixture